Hillsboro's trusted spray foam contractor for commercial roofing, residential insulation, and emergency roof repair across Oregon.
Professional roofing, coating, and insulation services for Hillsboro property owners and facility managers.
Our maintenance programs extend roof life and reduce total cost of ownership. Semi-annual or annual visits include drain clearing, seam inspection, penetration checks, coating condition assessment, and immediate repair of minor issues.
Upgrade your attic insulation from fiberglass or cellulose to spray foam and feel the difference the same day. SPF does not settle, sag, or leave gaps — it expands to fill every cavity and seals air leaks that other materials miss.
Pre-purchase, post-storm, or routine maintenance — our inspection reports give you the data you need to make informed decisions about your roof. Infrared moisture scans reveal trapped water invisible from the surface.
Large-scale commercial roof restoration using SPF and coating systems that extend roof life by 20 or more years without the cost and disruption of full replacement. Phased scheduling available to keep your business operational.
High-performance silicone roof coatings that resist ponding water, UV degradation, and extreme temperatures. Unlike acrylics, silicone does not re-emulsify in standing water — making it ideal for flat roofs with drainage challenges.
Professional flat roof repair for all membrane types — TPO, EPDM, modified bitumen, built-up, and PVC. We find the actual source of the leak using infrared scanning and fix it permanently, not with another temporary patch.
Active roof leak? We locate the source using advanced detection methods, then repair it permanently at the root cause. No guesswork, no temporary patches — just lasting results backed by our workmanship warranty.
Elastomeric coatings for standing seam, corrugated, and R-panel metal roofs. We seal rust spots, failing fasteners, open seams, and ridge caps — stopping leaks and adding reflective energy savings in a single application.
When your roof is structurally sound but the surface is deteriorating, restoration is the smart investment. We clean, repair, and recoat your entire roof with a warranted system that performs like new at a fraction of replacement cost.
Seamless waterproofing membranes applied over existing roof surfaces to eliminate leaks and ponding water permanently. Our spray-applied systems conform to every detail and create a monolithic barrier with no seams to fail.
New spray polyurethane foam roof installation that creates a seamless, self-adhering membrane with the highest R-value per inch of any roofing system. Energy-efficient, leak-proof, and engineered to last 30 to 50 years with periodic recoating.
Transform your crawl space from a moisture liability into a conditioned, energy-efficient part of your building envelope. Spray foam eliminates condensation, prevents mold conditions, and dramatically improves floor comfort above.
When restoration is not enough, our crews perform complete roof tear-off and replacement with modern spray foam roofing systems. Full deck inspection, substrate repair, SPF application, and protective coating — all warranted.
From minor surface patches to full-section refoaming and recoating, our repair crews restore SPF roof performance using materials compatible with your existing system. Every repair is blended seamlessly and warranted.
Hail, wind, and debris damage demand immediate attention and thorough documentation. Our crews respond quickly, document all damage with photos and measurements that satisfy insurance adjusters, and restore your roof completely.
In a city like Hillsboro with 111,963 residents, commercial and residential energy demand is enormous — and so is the opportunity to reduce it. Lapolla Industries installs spray foam roofing and insulation systems that deliver the highest R-value per inch of any product on the market, cutting HVAC energy consumption by 20 to 40 percent in buildings across Hillsboro, OR.
Our SPF technology works by creating a monolithic, air-impermeable barrier that conventional insulation materials cannot match. Fiberglass settles. Cellulose shifts. Foam board has seams. Spray foam expands to fill every cavity and conforms to every surface, eliminating the thermal bypasses that drive energy waste in Hillsboro buildings. The result is measurable savings from the first month.
Here is what sets Lapolla Industries apart from other contractors in Hillsboro.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
No hidden fees, no surprise charges. You receive a detailed written estimate before we start and the final invoice matches — guaranteed. Every line item explained.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Unlike conventional roofing with seams, joints, and fasteners, spray foam creates a monolithic membrane with zero penetration points — eliminating the most common sources of roof leaks.
Every project starts with a no-obligation inspection using infrared moisture scanning and visual assessment. We identify every issue and provide an honest, transparent estimate.
Common questions about spray foam roofing and insulation in Hillsboro, OR.
A properly installed SPF roof in Hillsboro can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.
In most cases, yes. One of the biggest advantages of SPF roofing is that it can be applied directly over existing roof membranes — TPO, EPDM, built-up, and even metal — without a costly tear-off. Our Hillsboro crews evaluate the existing substrate to ensure it is structurally sound before application.
Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For Hillsboro homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.
Spray foam insulation costs in Hillsboro typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Hillsboro homeowners see a full return on investment through energy savings within 3 to 5 years.
Spray foam is one of the best solutions for flat and low-slope roofs in Hillsboro. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
Yes. Every Hillsboro crew is fully licensed, bonded, and insured for spray foam roofing and insulation work. We carry general liability and workers compensation coverage on every project. You can request proof of insurance before any work begins.
Real reviews from property owners we have served across the country.
"Lapolla Industries installed a spray foam roof on our warehouse last spring. Their crew was thorough, professional, and finished ahead of schedule. The building stays cooler in summer and the roof looks pristine a year later."
"We manage a 40,000 square foot retail center and the roof was near end of life. Instead of tearing it off they restored it with a spray foam and coating system. Saved us over sixty percent versus replacement and added twenty years of life."
"Straight-line winds peeled back a section of our flat roof membrane during a severe thunderstorm. Lapolla Industries had a crew out the next morning to tarp and secure it. Full repair completed by end of week. Lifesavers when we needed them most."
Looking for a spray foam contractor near Hillsboro? We serve these surrounding areas too.